Department of
| Title | Type | Journal Name | Year | Author | URL |
|---|---|---|---|---|---|
| A sustainable approach to develop antimicrobial composite film incorporating novel Dalbergia reniformis seed-derived microcrystalline cellulose and medicinal Mikania micrantha extract in PVA | Journal Article | International Journal of Biological Macromolecules | 2025 | Ms. Fahmida-E-Karim | Paper Link |
| A sustainable approach to develop antimicrobial composite film incorporating novel Dalbergia reniformis seed-derived microcrystalline cellulose and medicinal Mikania micrantha extract in PVA | Journal Article | International Journal of Biological Macromolecules | 2025 | Mr. Md. Redwanul Islam | Paper Link |
| An approach to choose the suitable blend ratio of virgin cotton, pre-consumer, and spinning process wastes for rotor-spun yarn using an analytic hierarchy process | Journal Article | Journal of Industrial Textiles | 2025 | Mr. Subrata Kumar Saha | Paper Link |
| An approach to choose the suitable blend ratio of virgin cotton, pre-consumer, and spinning process wastes for rotor-spun yarn using an analytic hierarchy process | Journal Article | Journal of Industrial Textiles | 2025 | Mr. Amit Chakrabortty | Paper Link |
| An approach to choose the suitable blend ratio of virgin cotton, pre-consumer, and spinning process wastes for rotor-spun yarn using an analytic hierarchy process | Journal Article | Journal of Industrial Textiles | 2025 | Mr. Jamal Hossen | Paper Link |
| Application of Artificial Neural Networks in yarn manufacturing industry: A critical review | Journal Article | Journal of Engineered Fibers and Fabrics | 2025 | Mr. Subrata Kumar Saha | Paper Link |
| Application of Artificial Neural Networks in yarn manufacturing industry: A critical review | Journal Article | Journal of Engineered Fibers and Fabrics | 2025 | Mr. Amit Chakrabortty | Paper Link |
| Application of Artificial Neural Networks in yarn manufacturing industry: A critical review | Journal Article | Journal of Engineered Fibers and Fabrics | 2025 | Mr. Jamal Hossen | Paper Link |
| Bio-waste as a resource for sustainable nanocomposites: strategies and multifunctional applications | Journal Article | Functional Composites and Structures | 2025 | Ms. Fahmida-E-Karim | Paper Link |
| Bio-waste as a resource for sustainable nanocomposites: strategies and multifunctional applications | Journal Article | Functional Composites and Structures | 2025 | Mr. Md. Redwanul Islam | Paper Link |
| Development of conductive polymer-coated textiles for pressure and strain sensors | Book | Advances in Electrically Conductive Textiles | 2025 | Mr. Abdullah Sayam | Paper Link |
| Environmental and Sustainability Aspects of Microbial Pigment Production | Book | Microbial Colorants: Chemistry, Biosynthesis and Applications | 2025 | Ms. Iffat Ara Anannya | Paper Link |
| Environmental and Sustainability Aspects of Microbial Pigment Production | Book | Microbial Colorants: Chemistry, Biosynthesis and Applications | 2025 | Mr. Md. Mazharul Haque | Paper Link |
| Environmental and Sustainability Aspects of Microbial Pigment Production | Book | Microbial Colorants: Chemistry, Biosynthesis and Applications | 2025 | Dr. Mohammad Tajul Islam | Paper Link |
| Environmental and Sustainability Aspects of Microbial Pigment Production | Book | 2025 | Ms. Noor-E-Farzana Annesha | ||
| https://onlinelibrary.wiley.com/doi/10.1002/9781394287888.ch19 | Book | Microbial Colorants: Chemistry, Biosynthesis and Applications | 2025 | Ms. Iffat Ara Anannya | Paper Link |
| Mechanical properties of hemp fiber‐reinforced thermoset and thermoplastic polymer composites: A comprehensive review | Journal Article | SPE Polymers | 2025 | Ms. Fahmida-E-Karim | Paper Link |
| Mechanical properties of hemp fiber‐reinforced thermoset and thermoplastic polymer composites: A comprehensive review | Journal Article | SPE Polymers | 2025 | Mr. Md. Redwanul Islam | Paper Link |
| Microbial Colorants for Sustainable Dyeing and Printing of Textiles | Book | Microbial Colorants: Chemistry, Biosynthesis and Applications | 2025 | Ms. Iffat Ara Anannya | Paper Link |
| Microbial Colorants for Sustainable Dyeing and Printing of Textiles | Book | Microbial Colorants: Chemistry, Biosynthesis and Applications | 2025 | Mr. Md. Mazharul Haque | Paper Link |
| Microbial Colorants for Sustainable Dyeing and Printing of Textiles | Book | Microbial Colorants: Chemistry, Biosynthesis and Applications | 2025 | Ms. Tamjida Islam | Paper Link |
| Microbial Colorants for Sustainable Dyeing and Printing of Textiles | Book | Microbial Colorants: Chemistry, Biosynthesis and Applications | 2025 | Dr. Mohammad Tajul Islam | Paper Link |
| Microbial Colorants for Sustainable Dyeing and Printing of Textiles | Book | 2025 | Ms. Noor-E-Farzana Annesha | ||
| Microbial Colorants in Technological Advancements | Book | Microbial Colorants: Chemistry, Biosynthesis and Applications | 2025 | Ms. Tamjida Islam | Paper Link |
| Microbial Colorants in Technological Advancements | Book | Microbial Colorants: Chemistry, Biosynthesis and Applications | 2025 | Dr. Mohammad Tajul Islam | Paper Link |
| Opportunities and Challenges for Bangladesh's Clothing Industry in the Circular Economy | Journal Article | SciEn Conference Series: Engineering | 2025 | Mr. Kazi Rezwan Hossain | Paper Link |
| Separation and Improvisation of a Unique Natural Cellulosic Fiber From the Exterior Sheet of Bangladeshi Amaranthus viridis | Journal Article | Advances in Materials Science and Engineering | 2025 | Ms. Fahmida-E-Karim | Paper Link |
| Separation and Improvisation of a Unique Natural Cellulosic Fiber From the Exterior Sheet of Bangladeshi Amaranthus viridis | Journal Article | Advances in Materials Science and Engineering | 2025 | Mr. Md. Redwanul Islam | Paper Link |
| Solvent Pulping Method: Extraction | Book | Handbook of Lignin | 2025 | Ms. Fahmida-E-Karim | Paper Link |
| Solvent Pulping Method: Extraction | Book | Handbook of Lignin | 2025 | Mr. Md. Redwanul Islam | Paper Link |
| Understanding the Design and Sensory Behaviour of Graphene-Impregnated Textile-Based Piezoresistive Pressure Sensors | Journal Article | Sensors | 2025 | Mr. Md. Faisal Mahmud | Paper Link |
| A Fuzzy Multi-Criteria Model with Pareto Analysis for Prioritizing Sustainable Supply Chain Barriers in the Textile Industry: Evidence from an Emerging Economy | Journal Article | Sustainable Operations and Computers | 2024 | Mr. Mohammad Faizur Rahman | Paper Link |
| Analyze the Effect of Mingling Chamber (60z and 92z2 Made of Copper) on Splice Strength and Appearance in Air and Water Mode | Journal Article | Journal of The Institution of Engineers (India): Series E. | 2024 | Ms. Fahmida-E-Karim | Paper Link |
| Analyze the Effect of Mingling Chamber (60z and 92z2 Made of Copper) on Splice Strength and Appearance in Air and Water Mode | Journal Article | Journal of The Institution of Engineers (India): Series E | 2024 | Mr. Md. Redwanul Islam | Paper Link |
| Application of Low-Temperature Air Plasma for the Enhancement of Defense Fabric’s Self-Cleaning Property | Journal Article | ACS Omega | 2024 | Mr. Md. Faisal Mahmud | Paper Link |
| Artificial Intelligence (AI) in sustainable textile processing chain: scopes, challenges, and opportunities | Conference Proceedings | Digital Fashion Innovation Conference (DFIC) | 2024 | Mr. Md. Faisal Mahmud | |
| Assessing compliance with International Labor Organization convention No. 100 in Bangladesh's ready-made garments industry for sustainable development goal | Journal Article | Tekstilna industrija | 2024 | Mr. Amit Chakrabortty | Paper Link |
| Assessing the consequences of water retention on the structural integrity of jute fiber and its composites: A review | Journal Article | SPE Polymers | 2024 | Ms. Fahmida-E-Karim | Paper Link |
| Assessing the consequences of water retention on the structural integrity of jute fiber and its composites: A review | Journal Article | SPE Polymers | 2024 | Mr. Md. Redwanul Islam | Paper Link |
| Assessing the Prospect of Sustainable Bio-composites Produced From Corn Starch and Reinforced With Jute Spinning Mills Waste | Journal Article | Advances in Materials Science and Engineering | 2024 | Ms. Fahmida-E-Karim | Paper Link |
| Assessing the Prospect of Sustainable Biocomposites Produced From Corn Starch and Reinforced With Jute Spinning Mills Waste | Journal Article | Advances in Materials Science and Engineering | 2024 | Mr. Md. Redwanul Islam | Paper Link |
| Bead-Free Electrospun Nanofibrous Scaffold Made of PVOH/Keratin/Chitosan Using a Box–Behnken Experimental Design and In Vitro Studies | Journal Article | Polysaccharides | 2024 | Dr. Mohammad Tajul Islam | Paper Link |
| Carbon-Based Textile-Structured Triboelectric Nanogenerators for Smart Wearables | Journal Article | Advanced Energy & Sustainability Research | 2024 | Mr. Abdullah Sayam | Paper Link |
| Chitosan as a cationizing agent in pigment dyeing of cotton fabric | Journal Article | Carbohydrate Polymer Technologies and Applications | 2024 | Dr. Mohammad Tajul Islam | Paper Link |
| Current trends in textile wastewater treatment—bibliometric review | Journal Article | Environmental Science and Pollution Research | 2024 | Dr. Mohammad Tajul Islam | Paper Link |
| Developing and Screening of a Bacteria-Fighting and Moisture-Controlling Coccinia grandis and Poly(vinyl alcohol) Electrospun Nanofibrous Mat | Journal Article | ACS OMEGA | 2024 | Ms. Fahmida-E-Karim | Paper Link |
| Developing and Screening of a Bacteria-Fighting and Moisture-Controlling Coccinia grandis and Poly(vinyl alcohol) Electrospun Nanofibrous Mat | Journal Article | ACS OMEGA | 2024 | Mr. Md. Redwanul Islam | Paper Link |
| Development of conductive polymer coated textiles for pressure and strain sensors | Book | The Textile Institute Book Series on Advances in Electrically Conductive Textiles | 2024 | Mr. Md. Faisal Mahmud | Paper Link |
| Eco-friendly biopolishing of cotton fabric through wasted sugarcane bagasse-derived enzymes | Journal Article | Heliyon | 2024 | Mr. Md. Shah Ikbal | Paper Link |
| Effect of core material draft ratio and denier on core spun yarn and denim fabric properties pre and post washing | Journal Article | Heliyon | 2024 | Dr. Mohammad Tajul Islam | Paper Link |
| Effect of cotton-polyester composite yarn on the physico-mechanical and comfort properties of woven fabric, | Journal Article | SPE Polymers | 2024 | Ms. Shaima Islam | |
| Effect of natural thickener on printing performance over cotton woven fabric | Journal Article | Heliyon | 2024 | Ms. Nasrin Akter | |
| Effect of natural thickener on printing performance over cotton woven fabric, | Journal Article | Heliyon | 2024 | Ms. Shaima Islam | |
| Effectofcotton-polyestercompositeyarnonthe physico-mechanicalandcomfortpropertiesofwovenfabric | Journal Article | Willey | 2024 | Ms. Nasrin Akter | Paper Link |
| Emerging iron-based mesoporous materials for adsorptive removal of pollutants: Mechanism, optimization, challenges, and future perspective | Journal Article | Chemosphere | 2024 | Dr. Mohammad Tajul Islam | Paper Link |
| Exploring the manufacturing flexibility issues to build a framework to implement the manufacturing flexibility of a supply chain: a review | Journal Article | International Journal of Industrial and Systems Engineering | 2024 | Dr. Chowdhury Jony Moin | Paper Link |
| Flexible, Quickly Responsive, and Highly Efficient Carbon Nanotube/Thermoplastic Polyurethane Composite Yarn for Multifunctional Wearable Devices | Journal Article | ACS Applied Polymer Materials | 2024 | Dr. Farial Islam Farha | |
| Functionalized Cellulose for Textile Organic Pollutant Treatment: a Comprehensive Review | Journal Article | Water Conservation Science and Engineering | 2024 | Dr. Mohammad Tajul Islam | Paper Link |
| Green extraction of dyes and pigments from natural resources | Book | Renewable Dyes and Pigments | 2024 | Dr. Mohammad Tajul Islam | Paper Link |
| Introducing Sustainability Education in Textile Engineering Curriculum of Bangladesh through an International Academia-Industry Collaboration | Conference Proceedings | International Symposium on Fiber Science and Technology 2024 (ISF2024) | 2024 | Dr. Mohammad Tajul Islam | |
| Investigating Carded Yarn Quality through Cross-Doubling in the Draw frame: A Comprehensive Analysis | Journal Article | Tekstilec | 2024 | Mr. Amit Chakrabortty | Paper Link |
| Investigating Spindle Tape Aging Efects on Ring Spun Yarn Quality: A Regression Analysis Approach | Journal Article | Fibers and Polymers | 2024 | Mr. Subrata Kumar Saha | Paper Link |
| Investigating Spindle Tape Aging Efects on Ring Spun Yarn Quality: A Regression Analysis Approach | Journal Article | Fibers and Polymers | 2024 | Mr. Jamal Hossen | Paper Link |
| Investigating Spindle Tape Aging Effects on Ring Spun Yarn Quality: A Regression Analysis Approach | Journal Article | Fibers and Polymers | 2024 | Mr. Amit Chakrabortty | Paper Link |
| Mapping Digitally Enabled Sustainable Practices in Fashion Manufacturing to Scale Up Circularity | Conference Proceedings | Digital Fashion Innovation Conference(DFIC) | 2024 | Mr. Md. Faisal Mahmud | |
| Optimizing yarn properties through response surface methodology: Finding the ideal flax and cotton fiber proportion in blended yarns by using design-expert software | Journal Article | SPE Polymers | 2024 | Ms. Fahmida-E-Karim | Paper Link |
| Optimizing yarn properties through response surface methodology: Finding the ideal flax and cotton fiber proportion in blended yarns by using design-expert software | Journal Article | SPE Polymers | 2024 | Mr. Md. Redwanul Islam | Paper Link |
| Preparation and characterization of MgO-based composites: Analysis of moisture, corrosion, and fungal resistance, and mechanical properties | Journal Article | Construction and building materials | 2024 | Ms. Fahmida-E-Karim | Paper Link |
| Prioritising Yarn Quality Via Varying Top Roller Hardness: A Fuzzy Application | Journal Article | Textile & Leather Review | 2024 | Mr. Subrata Kumar Saha | Paper Link |
| Prioritising Yarn Quality Via Varying Top Roller Hardness: A Fuzzy Application | Journal Article | Textile & Leather Review | 2024 | Mr. Shahriar Raian | Paper Link |
| Prioritising Yarn Quality Via Varying Top Roller Hardness: A Fuzzy Application | Journal Article | Textile & Leather Review | 2024 | Mr. Kazi Rezwan Hossain | Paper Link |
| Prioritising Yarn Quality Via Varying Top Roller Hardness: A Fuzzy Application | Journal Article | Textile & Leather Review | 2024 | Mr. Jamal Hossen | Paper Link |
| Properties and Performance of Biopolymers in Textile Applications | Book | Biopolymers in the Textile Industry | 2024 | Mr. Md. Arif Mahmud | Paper Link |
| Properties and Performance of Biopolymers in Textile Applications | Book | 2024 | Mr. Kazi Rezwan Hossain | Paper Link | |
| Properties and Performance of Biopolymers in Textile Applications | Book | Biopolymers in the Textile Industry | 2024 | Ms. Sharmin Akter | Paper Link |
| Single-bath-single-stage enzymatic treatment of denim | Journal Article | Results in Engineering | 2024 | Dr. Mohammad Tajul Islam | Paper Link |
| Splitting and authentication of the newest retrieved cellulose-rich organic fiber from the exterior layer of Bangladeshi palmyra seed sprouts | Journal Article | RSC Advances | 2024 | Ms. Fahmida-E-Karim | Paper Link |
| Splitting and authentication of the newest retrieved cellulose-rich organic fiber from the exterior layer of Bangladeshi palmyra seed sprouts | Journal Article | RSC Advances | 2024 | Mr. Md. Redwanul Islam | Paper Link |
| Statistical analysis of Cotton-Jute blended ratio for producing good quality blended yarn | Journal Article | Heliyon | 2024 | Ms. Fahmida-E-Karim | Paper Link |
| Statistical analysis of Cotton-Jute blended ratio for producing good quality blended yarn | Journal Article | Heliyon | 2024 | Mr. Md. Redwanul Islam | Paper Link |
| Study on the Halochromic Effect of Curcumin Dyed Fabric | Conference Proceedings | International Symposium on Fiber Science and Technology 2024 (ISF2024) | 2024 | Dr. Mohammad Tajul Islam | |
| Superior Conductive, Large Diameter CNT Composite Yarn of Insulative Polymer: Inferences of a Unidirectional Compression-Stretching Technique | Journal Article | Journal of Polymer Science | 2024 | Dr. Farial Islam Farha | |
| Surface modification of Luffa and Maize fibers by using alkali medium | Journal Article | Cleaner Engineering and Technology | 2024 | Ms. Fahmida-E-Karim | Paper Link |
| Surface modification of Luffa and Maize fibers by using alkali medium | Journal Article | Cleaner Engineering and Technology | 2024 | Mr. Md. Redwanul Islam | Paper Link |
| Sustainable development of three distinct starch based bio-composites reinforced with the cotton spinning waste collected from fiber preparation stage | Journal Article | Heliyon | 2024 | Ms. Fahmida-E-Karim | Paper Link |
| Sustainable development of three distinct starch based bio-composites reinforced with the cotton spinning waste collected from fiber preparation stage | Journal Article | Heliyon | 2024 | Mr. Md. Redwanul Islam | Paper Link |
| Tailoring the performance of cellulosic textiles by chemical treatment and ionizing radiation: Assessment of physical, mechanical, thermal, crystal and morphological properties | Journal Article | Next Materials | 2024 | Ms. Nasrin Akter | Paper Link |
| Thermoset and thermoplastic polymer composite with date palm fiber and its behavior: A review | Journal Article | SPE Polymers | 2024 | Ms. Fahmida-E-Karim | Paper Link |
| Thermoset and thermoplastic polymer composite with date palm fiber and its behavior: A review | Journal Article | SPE Polymers | 2024 | Mr. Md. Redwanul Islam | Paper Link |
| Thermoset and thermoplastic polymer composites reinforced with flax fiber: Properties and application—A review | Journal Article | SPE Polymers | 2024 | Ms. Fahmida-E-Karim | Paper Link |
| Thermoset and thermoplastic polymer composites reinforced with flax fiber: Properties and application—A review | Journal Article | SPE Polymers | 2024 | Mr. Md. Redwanul Islam | Paper Link |
| Triboelectric Nanogenerators for Self-Powered Degradation of Chemical Pollutants | Journal Article | ACS OMEGA | 2024 | Mr. Abdullah Sayam | Paper Link |
| Unleashing the power of manufacturing flexibility: enhancing performance in Bangladesh's ready-made garment industry. | Journal Article | Journal of Manufacturing Technology Management | 2024 | Dr. Chowdhury Jony Moin | Paper Link |
| Willingness of Buyers to Buy Wearable Rejected Clothes from Clothing Manufacturers: Model for Fostering Sustainable Apparel Business | Journal Article | Tekstilec | 2024 | Mr. Mohammad Ashraful Alam | Paper Link |
| An approach to improve the existing ribbon retting of jute fibre using concrete tank and natural catalyst | Journal Article | Heliyon | 2023 | Mr. Amit Chakrabortty | Paper Link |
| An empirical model for identifying and controlling operational and environmental risks in spinning industry in an emerging economy | Journal Article | Computers & Industrial Engineering | 2023 | Mr. Shahriar Raian | Paper Link |
| Assessing the Impact of Spacer Size Variations on the Ring-Spun Yarn Quality Ranking | Journal Article | Textile & Leather Review | 2023 | Mr. Subrata Kumar Saha | Paper Link |
| Assessing the Impact of Spacer Size Variations on the Ring-Spun Yarn Quality Ranking | Journal Article | Textile & Leather Review | 2023 | Mr. Shahriar Raian | Paper Link |
| Assessing the Impact of Spacer Size Variations on the Ring-spun Yarn Quality Ranking | Journal Article | Textile & Leather Review | 2023 | Mr. Jamal Hossen | Paper Link |
| Bibliometric Evidence on the Trend and Future Direction of the Research on Textile Coloration with Natural Sources | Journal Article | Coatings | 2023 | Dr. Mohammad Tajul Islam | Paper Link |
| Bibliometric Evidence on the Trend and Future Direction of the Research on Textile Coloration with Natural Sources | Journal Article | Coatings | 2023 | Mr. Md. Himel Mahmud | Paper Link |
| Chemically–treated Jute Bags as an Alternative to Poly(propylene) Bags | Conference Proceedings | The Fiber Society 2023 Fall Meeting and Technical Conference, Drexel University Philadelphia, Pennsylvania, USA | 2023 | Dr. Mohammad Tajul Islam | Paper Link |
| Coir fiber as thermal insulator and its performance as reinforcing material in biocomposite production | Journal Article | Heliyon | 2023 | Mr. Md. Arif Mahmud | Paper Link |
| Collagen/Nigella sativa/chitosan inscribed electrospun hybrid bio-nanocomposites for skin tissue engineering | Journal Article | Journal of Biomaterials Science, Polymer Edition | 2023 | Ms. Fahmida-E-Karim | Paper Link |
| Design and development of canvas trousers using sustainable natural dye | Journal Article | Tekstilna industrija | 2023 | Mr. Mohammad Faizur Rahman | Paper Link |
| Design and development of canvas trousers using sustainable natural dye | Journal Article | Tekstilna industrija | 2023 | Mr. Kazi Rezwan Hossain | Paper Link |
| Design and development of canvas trousers using sustainable natural dye | Journal Article | Tekstilna industrija | 2023 | Mr. Mohammad Ashraful Alam | |
| Design and development of canvas trousers using sustainable natural dye | Journal Article | Tekstilna industrija | 2023 | Mr. Md. Redwanul Islam | Paper Link |
| Design and fabrication of an instrument for splitted jute fiber length measurement | Journal Article | Journal of The Institution of Engineers (India): Series E. | 2023 | Ms. Fahmida-E-Karim | Paper Link |
| Design and fabrication of an instrument for splitted jute fiber length measurement | Journal Article | Journal of The Institution of Engineers (India): Series E. | 2023 | Mr. Md. Redwanul Islam | Paper Link |
| Development of a biocomposite material using sugarcane bagasse and modified starch for packaging purposes | Journal Article | Journal of Materials Research and Technology | 2023 | Mr. Md. Arif Mahmud | Paper Link |
| Dragon Fruit (Hylocereus polyrhizus): A Green Colorant for Cotton Fabric | Journal Article | Colorants | 2023 | Dr. Mohammad Tajul Islam | Paper Link |
| Dyeing of cotton/acrylic blend fabric in a single-bath-single-stage method using indigo dye | Journal Article | Coloration Technology | 2023 | Dr. Mohammad Tajul Islam | Paper Link |
| Evaluation and optimization of pretreatment process for lyocell knitted fabric dyeing with reactive dyestuff | Journal Article | Cellulose | 2023 | Ms. Nasrin Akter | Paper Link |
| Evaluation of physical and mechanical characteristics of three-thread fleece knit fabric for their structural changes | Journal Article | Heliyon | 2023 | Mr. Abdullah Sayam | Paper Link |
| Evaluation of Physical and Mechanical Characteristics of Three-Thread Fleece Knit Fabric for Their Structural Changes | Journal Article | Heliyon, Cell-Press, Elsevier Ltd | 2023 | Mr. Md. Faisal Mahmud | Paper Link |
| Extraction and characterization of a newly developed cellulose enriched sustainable natural fiber from the epidermis of Mikania micrantha | Journal Article | Heliyon | 2023 | Ms. Fahmida-E-Karim | Paper Link |
| Extraction and characterization of a newly developed cellulose enriched sustainable natural fiber from the epidermis of Mikania micrantha | Journal Article | Heliyon | 2023 | Mr. Md. Redwanul Islam | Paper Link |
| IMPACT OF MODIFIED FEED MECHANISM ON SEAM QUALITY OF GARMENTS | Journal Article | Annals of the University of Oradea: Fascicle of Textiles, Leatherwork | 2023 | Mr. Mohammad Faizur Rahman | Paper Link |
| IMPACT OF MODIFIED FEED MECHANISM ON SEAM QUALITY OF GARMENTS | Journal Article | ANNALS OF THE UNIVERSITY OF ORADEA FASCICLE OF TEXTILES, LEATHERWORK | 2023 | Mr. Kazi Rezwan Hossain | Paper Link |
| Impact of modified feed mechanism on the seam quality of garments | Journal Article | Annals of the University of Oradea. Fascicle of Textiles, Leatherwork | 2023 | Mr. Mohammad Ashraful Alam | Paper Link |
| Incandescent annealing purification of carbon nanotube films with high efficiency and non-destructiveness | Journal Article | Surfaces and Interfaces | 2023 | Dr. Farial Islam Farha | |
| Influence of Blending Method and Blending Ratio on Ring-spun Yarn Quality – a MANOVA Approach | Journal Article | Tekstilec | 2023 | Mr. Subrata Kumar Saha | Paper Link |
| Influence of Blending Method and Blending Ratio on Ring-spun Yarn Quality – a MANOVA Approach | Journal Article | Tekstilec | 2023 | Mr. Jamal Hossen | Paper Link |
| Investigating Root Causes of Sewing Defects Using TQM Tools for Quality Improvement in the Knit Garment Industry | Journal Article | Textile & Leather Review | 2023 | Mr. Kazi Rezwan Hossain | Paper Link |
| Investigating Root Causes of Sewing Defects Using TQM Tools for Quality Improvement in the Knit Garment Industry. | Journal Article | Textile & Leather Review | 2023 | Dr. Chowdhury Jony Moin | Paper Link |
| Mechanical Characterization of Luffa-Bagasse Fiber Reinforced Polymer Based Hybrid Composite | Journal Article | Textile & Leather Review | 2023 | Mr. Md. Redwanul Islam | Paper Link |
| Mechanical Characterization of Luffa-Bagasse Fiber Reinforced Polymer Based Hybrid Composite | Journal Article | Textile & Leather Review | 2023 | Ms. Fahmida-E-Karim | Paper Link |
| Nonwoven natural fiber preforms | Book | Multiscale Textile Preforms and Structures for Natural Fiber Composites | 2023 | Dr. Mohammad Tajul Islam | Paper Link |
| Nonwoven natural fiber preforms | Book | Woodhead Publishing Series in Composites Science and Engineering | 2023 | Mr. Md. Faisal Mahmud | Paper Link |
| Prioritizing the quality parameters of cotton carded knit yarn by varying tensions of the bottom aprons of the ring frame | Journal Article | Textile & Leather Review | 2023 | Mr. Shahriar Raian | Paper Link |
| Structural Coloration in Textiles | Book | Advanced Technology in Textiles | 2023 | Dr. Mohammad Tajul Islam | Paper Link |
| Sustainable pollutant removal and wastewater remediation using TiO2-based nanocomposites: A critical review | Journal Article | Nano-Structures & Nano-Objects | 2023 | Ms. Nawshin Farzana | Paper Link |
| The influence of mixed thickeners on printing over lyocell knitted fabric | Journal Article | Heliyon | 2023 | Ms. Nasrin Akter | Paper Link |
| Triboelectric nanogenerators assisted synthesis and detection of chemical compound | Journal Article | Journal of Materials Chemistry A | 2023 | Mr. Abdullah Sayam | Paper Link |
| Triboelectric Nanogenerators for Marine Applications: Recent Advances in Energy Harvesting, Monitoring, and Self-Powered Equipment | Journal Article | Advanced Materials Technologies | 2023 | Mr. Abdullah Sayam | Paper Link |
| A greener approach to cotton pre-treatment using bentonite clay | Journal Article | The Journal of The Textile Institute | 2022 | Mr. Md. Koushic Uddin | Paper Link |
| A review on carbon fiber-reinforced hierarchical composites: Mechanical performance, manufacturing process, structural applications and allied challenges | Journal Article | Carbon Letters | 2022 | Mr. Abdullah Sayam | Paper Link |
| Assessing Carbon Footprint of Textile Spinning Process in Bangladesh | Journal Article | International Journal of Environmental Sciences & Natural Resources | 2022 | Mr. Md. Redwanul Islam | Paper Link |
| Assessing Carbon Footprint of Textile Spinning Process in Bangladesh | Journal Article | International Journal of Environmental Sciences & Natural Resources | 2022 | Mr. Kazi Rezwan Hossain | Paper Link |
| Assessing Carbon Footprint of Textile Spinning Process in Bangladesh | Journal Article | International Journal of Environmental Sciences & Natural Resources | 2022 | Ms. Fahmida-E-Karim | Paper Link |
| Assessing sustainability risks in the supply chain of the textile industry under uncertainty | Journal Article | Resources, Conservation and Recycling | 2022 | Mr. Shahriar Raian | Paper Link |
| Chemical processing of knitted fabrics | Book | Advanced Knitting Technology | 2022 | Mr. Muksit Ahamed Chowdhury | Paper Link |
| Comparison between simplex roller gauge of 40.5×50×52 mm and 39.5×49.5×50.5 mm | Journal Article | International Journal of Engineering & Technology | 2022 | Ms. Fahmida-E-Karim | Paper Link |
| Comparison between simplex roller gauge of 40.5×50×52 mm and 39.5×49.5×50.5 mm | Journal Article | International Journal of Engineering & Technology | 2022 | Mr. Md. Redwanul Islam | Paper Link |
| Effect of opening roller speed of rotor spinning machine on the yarn quality. | Journal Article | International Journal of Multidisciplinary Research and Growth Evaluation | 2022 | Ms. Fahmida-E-Karim | Paper Link |
| Effect of opening roller speed of rotor spinning machine on the yarn quality. | Journal Article | International Journal of Multidisciplinary Research and Growth Evaluation | 2022 | Mr. Md. Redwanul Islam | Paper Link |
| Effect of the duration of retting on jute fiber length | Journal Article | International Journal of Engineering & Technology | 2022 | Ms. Fahmida-E-Karim | Paper Link |
| Effect of the duration of retting on jute fiber length | Journal Article | International Journal of Engineering & Technology | 2022 | Mr. Md. Redwanul Islam | Paper Link |
| Effect of the duration of retting on jute fiber length, International Journal of Engineering & Technology, 2022 | Journal Article | International Journal of Engineering & Technology | 2022 | Mr. Kazi Rezwan Hossain | Paper Link |
| Evaluation of face masks quality features using Kano model and Unsupervised machine learning technique | Journal Article | Research Journal of Textile and Apparel | 2022 | Mr. Mohammad Ashraful Alam | Paper Link |
| Evaluation of the impact of cotton sheath linear density of core spun yarn on the performance of denim fabrics | Journal Article | Heliyon, Cell-press, Elsevier Ltd | 2022 | Mr. Md. Faisal Mahmud | Paper Link |
| Exploration of Barrier and Success Factors of Sustainability at Producer Level in Textile Industry : A Study of Bangladesh Perspective | Journal Article | Textile and Leather Review | 2022 | Ms. Nasrin Akter | |
| Exploration of Barriers and Success Factors of Sustainability at Producer Level in Textile Industry: A Study of Bangladesh Perspective | Journal Article | Textile and Leather Review | 2022 | Dr. Lal Mohan Baral | Paper Link |
| Exploration of Barriers and Success Factors of Sustainability at Producer Level in Textile Industry: A Study of Bangladesh Perspective | Journal Article | Textile & Leather Review | 2022 | Mr. Mohammad Faizur Rahman | Paper Link |
| Fabrication and characterization of 3-dimensional electrospun poly(vinyl alcohol)/keratin/chitosan nanofibrous scaffold | Journal Article | Carbohydrate Polymers | 2022 | Dr. Mohammad Tajul Islam | Paper Link |
| Future direction of wound dressing research: Evidence From the bibliometric analysis | Journal Article | Journal of Industrial Textiles | 2022 | Dr. Mohammad Tajul Islam | Paper Link |
| Influence of Denting Order on Quality and Appearance of Cotton Based Plain Woven Fabric | Journal Article | Journal of Natural Fibers | 2022 | Mr. Abdullah Sayam | Paper Link |
| Interfacial modified unidirectional wheat straw/polylactic acid composites | Journal Article | Journal of Industrial Textiles | 2022 | Dr. Farial Islam Farha | |
| Microstructural Tuning of Twisted Carbon Nanotube Yarns through the Wet-Compression Process: Implications for Multifunctional Textiles | Journal Article | ACS Applied Nano Materials | 2022 | Dr. Farial Islam Farha | |
| Modification of starch using alkali, adipic acid, and mustard oil in search of an improved biomaterial | Journal Article | Discover Materials | 2022 | Mr. Md. Arif Mahmud | |
| Nanotextiles in Civil and Geotechnical Engineering | Book | Smart Nanotextiles: Wearable and Technical Applications | 2022 | Dr. Mohammad Tajul Islam | Paper Link |
| Online Education System during the COVID-19 Pandemic Situation in Bangladesh | Journal Article | Academic Journal of Engineering Studies | 2022 | Mr. Md. Redwanul Islam | Paper Link |
| Online Education System during the COVID-19 Pandemic Situation in Bangladesh | Journal Article | Academic Journal of Engineering Studies | 2022 | Ms. Fahmida-E-Karim | Paper Link |
| Online Shopping: A Survey on Consumer Buying Behaviour in Bangladesh | Journal Article | European Scientific Journal | 2022 | Ms. Tamjida Islam | Paper Link |
| Opportunities and Challenges for Bangladesh's Clothing Industry in the Circular Economy | Conference Proceedings | 7th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2022) | 2022 | Mr. Kazi Rezwan Hossain | Paper Link |
| Pigment Coloration Research Published in the Science Citation Index Expanded from 1990 to 2020: A Systematic Review and Bibliometric Analysis | Journal Article | Colorants | 2022 | Dr. Mohammad Tajul Islam | Paper Link |
| Pigment Coloration Research Published in the Science Citation Index Expanded from 1990 to 2020: A Systematic Review and Bibliometric Analysis | Journal Article | Colorants | 2022 | Ms. Farzana Faiza | |
| Prioritization of Environmental Uncertainty and Manufacturing Flexibility for Labor-Intensive Industry: A Case Study on Ready-Made Garment Industries in Bangladesh. | Journal Article | Systems | 2022 | Dr. Chowdhury Jony Moin | Paper Link |
| Promising applications of iron-based materials in environmental remediation | Conference Proceedings | BCSIR Congress 2022, 1-3, December | 2022 | Dr. Mohammad Tajul Islam | Paper Link |
| Recent application of nanotechnology in environmental remediation | Conference Proceedings | International conference on 4IR for emerging future, 4-5 November 2022 | 2022 | Dr. Mohammad Tajul Islam | Paper Link |
| Recent emergent metal oxide based nanocomposites for textile effluent treatment | Conference Proceedings | International conference on Environmental Protection for Sustainable Development ICEPSD-2022, 2-4 September | 2022 | Dr. Mohammad Tajul Islam | Paper Link |
| Recent spectroscopic innovations for predicting adsorption mechanism | Conference Proceedings | 7th Conference of Bangladesh Crystallographic Association (BCA), 8-9, December | 2022 | Dr. Mohammad Tajul Islam | Paper Link |
| Removal of methylene blue and orange green using manganite (γ−MnOOH) from aqueous solutions | Conference Proceedings | 1st International Conference on Frontier in Sciences, 11-12 November | 2022 | Dr. Mohammad Tajul Islam | Paper Link |
| Super-strong CNT composite yarn with tight CNT packing via compress-stretch process | Journal Article | Nanoscale | 2022 | Dr. Farial Islam Farha | |
| The Trend of Bacterial Nanocellulose Research Published in the Science Citation Index Expanded from 2005 to 2020: A Bibliometric Analysis | Journal Article | Frontiers in Bioengineering and Biotechnology | 2022 | Dr. Mohammad Tajul Islam | Paper Link |
| 'C‘ Programming Establishment For Automated Trash Controlling In Carding Machine | Journal Article | INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH | 2021 | Mr. Md. Redwanul Islam | Paper Link |
| 'C‘ Programming Establishment For Automated Trash Controlling In Carding Machine | Journal Article | INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH | 2021 | Mr. Amit Chakrabortty | Paper Link |
| 3D printing technology for textiles and fashion | Journal Article | Textile Progress | 2021 | Mr. Abdullah Sayam | Paper Link |
| Advances and Applications of Bio Fiber Based Polymer Composites | Book | Advances in Bio-based Fibre | 2021 | Mr. Rashed Al Mizan | Paper Link |
| An Investigation on the Influence of Main Vacuum and Additional Suction Pressure on the Quality of Rotor Yarn | Journal Article | Trends in Textile Engineering & Fashion Technology | 2021 | Mr. Md. Redwanul Islam | Paper Link |
| An Investigation on the Influence of Main Vacuum and Additional Suction Pressure on the Quality of Rotor Yarn | Journal Article | Trends in Textile Engineering & Fashion Technology | 2021 | Mr. Amit Chakrabortty | Paper Link |
| Assessment of Carbon Footprint of Various Cotton Knitwear Production Processes in Bangladesh | Journal Article | AATCC Journal of Research | 2021 | Mr. Md. Arif Mahmud | Paper Link |
| Chemistry of sustainable coloration of textile materials | Book | Green Chemistry for Sustainable Textiles: Modern Design and Approaches | 2021 | Dr. Mohammad Tajul Islam | Paper Link |
| Consumer Perception towards Visual Merchandising in Apparel Retailing | Journal Article | International Journal of Innovative and Applied Science | 2021 | Mr. Mohammad Ashraful Alam | Paper Link |
| Development of Antimicrobial and Wound Healing Properties on Cotton Medical Bandage by using the Extract of Eco-Friendly Herbs | Journal Article | J. Inst. Eng. India Ser. E | 2021 | Mr. Amit Chakrabortty | Paper Link |
| Development of Antimicrobial and Wound Healing Properties on Cotton Medical Bandage by using the Extract of Eco-Friendly Herbs | Journal Article | Journal of The Institution of Engineers (India): Series E | 2021 | Mr. Md. Zulfikar Hasan | Paper Link |
| Dyeing of Cotton Knit Fabric with Natural Dyes Extracted from Java Plum | Journal Article | AATCC Journal of Research | 2021 | Mr. Md. Koushic Uddin | Paper Link |
| Effect of Pumic Stone and it's Substitutes on Denim Garments during Acid Wash | Journal Article | Journal of Textile and Apparel, Technology and Management | 2021 | Ms. Marzia Islam | |
| Enzymatic Wet Processing | Book | Sustainable Practices in the Textile Industry | 2021 | Dr. Mohammad Tajul Islam | Paper Link |
| Evaluation and analysis of Splice strength of Ring spun yarn produced from different types of Cotton fibers | Journal Article | Journal of Textile Science and Engineering | 2021 | Mr. Mohammad Ashraful Alam | Paper Link |
| Factors Influencing the Purcahse Intention of Eco-friendly protective Clothing and Textiles for COVID-19: A Case Study in Bangladesh | Conference Proceedings | Textile and Fashion Innovation Congress | 2021 | Mr. Mohammad Ashraful Alam | |
| Flame Retardant Finish for Textile Fibers | Book | Innovative and Emerging Technologies for Textile Dyeing and Finishing | 2021 | Dr. Mohammad Tajul Islam | Paper Link |
| Importance of Spindle Speed in Ring Frame | Journal Article | International Journal of Engineering & Technology | 2021 | Mr. Amit Chakrabortty | Paper Link |
| Importance of spindle speed in ring frame | Journal Article | International Journal of Engineering & Technology | 2021 | Mr. Md. Redwanul Islam | Paper Link |
| Light-weight strain sensor based on carbon nanotube/epoxy composite yarn | Journal Article | Journal of Materials Science | 2021 | Dr. Farial Islam Farha | |
| Mechanical and Dynamic Properties of Biocomposites | Book | John Wiley & Sons, 2021 | 2021 | Mr. Rashed Al Mizan | Paper Link |
| Single Step Mercerization and Formaldehyde-Free Polyfunctional Finishing on Cotton Fabrics | Journal Article | AATCC Journal of Research | 2021 | Ms. Sonia Hossain | |
| Single Step Mercerization and Formaldehyde-Free Polyfunctional Finishing on Cotton Fabrics | Journal Article | AATCC Journal of Research | 2021 | Mr. Muksit Ahamed Chowdhury | Paper Link |
| Statistical Analysis on Garments Finishing Process for Minimization of Production Gap | Journal Article | Daffodil International University Journal of Science and Technology | 2021 | Ms. Sharmin Akter | Paper Link |
| Structural Impact on Some Common Physical Properties of Single Jersey Weft Knit Fabric | Journal Article | AATCC Journal of Research | 2021 | Mr. Md. Ruhul Amin | Paper Link |
| Structural Impact on Some Common Physical Properties of Single Jersey Weft Knit Fabric | Journal Article | AATCC Journal of Research | 2021 | Mr. Md. Arif Mahmud | |
| Sugarcane bagasse-A source of cellulosic fiber for diverse applications | Journal Article | Heliyon | 2021 | Mr. Md. Arif Mahmud | |
| Synthetic and Natural UV Protective Agents for Textile Finishing | Book | Sustainable Practices in the Textile Industry | 2021 | Dr. Mohammad Tajul Islam | Paper Link |
| The Effects of Culm Nodes on Bamboo Fiber Properties.” Bamboo Fiber Composites | Book | Bamboo Fiber Composites | 2021 | Mr. Rashed Al Mizan | Paper Link |
| 3D textile structural conical conformal microstrip antennas for multifunctional flexible electronics | Journal Article | ACS Applied Electronic Materials | 2020 | Dr. Farial Islam Farha | |
| A Qualitative Analysis of Different Types of Water Repellent Agent Used on Cotton Fabric | Journal Article | European Scientific Journal | 2020 | Mr. Amit Chakrabortty | Paper Link |
| A Qualitative Analysis of Different Types of Water Repellent Agent Used on Cotton Fabric | Journal Article | European Scientific Journal ,ESJ | 2020 | Mr. Md. Redwanul Islam | Paper Link |
| An Approach to Search the Potentiality of Node in Bamboo Strip Reinforced Composites | Journal Article | The Journal of Metals, Materials and Minerals (JMMM) | 2020 | Mr. Rashed Al Mizan | Paper Link |
| Analysis and Prediction of Air Permeability of 100% Cotton Single Jersey Fabric Using Machine Learning Approaches | Journal Article | Journal of Textile and Apparel Technology | 2020 | Ms. Sharmin Akter | |
| Bamboo Strips with Nodes: Composites Viewpoint | Book | Biofibers and Biopolymers for Biocomposites | 2020 | Mr. Rashed Al Mizan | Paper Link |
| Chitosan: An effective material for textile waste water management | Journal Article | International Journal of Advanced Research (IJAR) | 2020 | Ms. Sonia Hossain | Paper Link |
| Colorimetric Analysis and Fastness Properties of Jute Fabric Dyed with Eucalyptus Leaves | Journal Article | Tekstilec | 2020 | Ms. Marzia Islam | |
| Comparative Study on Crease Recovery Finishing of Silk Fabric with Citric Acid and Dimethylol Dihydroxy Ethylene Urea (DMDHEU) as Finishing Agent | Journal Article | International Journal of Textile Science | 2020 | Ms. Shaima Islam | |
| Comparative study on dyeing of cotton, modal and lyocell fabrics using bifunctional and polyfunctional reactive dyes | Journal Article | Journal of Textile Science and Technology | 2020 | Mr. Md. Ershad Khan | |
| Compressive strength and thermal insulation properties of the 3D woven spacer composites with connected spacer yarn structure | Journal Article | Journal of Materials Science | 2020 | Dr. Farial Islam Farha | |
| Cotton in Weaving Technology | Book | Cotton Science and Processing Technology | 2020 | Dr. Farial Islam Farha | |
| Development and Characterization of Eco-Sustainable Banana Fiber Nonwoven Material: Surface Treatment, Water Absorbency and Mechanical Properties. | Journal Article | Cellulose | 2020 | Mr. Rashed Al Mizan | Paper Link |
| Development of sustainable jute geotextiles by bitumen emulsion and polyester resin: Effect of gamma radiation | Journal Article | Journal of Engineered fibres and fabrics | 2020 | Ms. Nasrin Akter | |
| Effect of Cotton Sheath Linear Density of Spun Yarn( Cotton/Spandex) on the Stretch Ability and Tearing Strength of the Denim Woven Fabrics | Conference Proceedings | sustainable Technology for the Industries | 2020 | Mr. Mohammad Ashraful Alam | |
| Effect of Cotton Sheath Linear Density of Spun Yarn( Cotton/Spandex) on the Stretch Ability and Tearing Strength of the Denim Woven Fabrics | Conference Proceedings | 2020 2nd International Conference on Sustainable Technologies for Industry 4.0 | 2020 | Mr. Md. Faisal Mahmud | |
| Effect of Feed Plate to Taker-in Distance of Carding Machine on the Quality of Cotton Card Sliver and CVC Ring-spun Yarn | Journal Article | Singapore Journal of Scientific Research | 2020 | Mr. Subrata Kumar Saha | Paper Link |
| Effect of Feed Plate to Taker-in Distance of Carding Machine on the Quality of Cotton Card Sliver and CVC ring-spun Yarn | Journal Article | Singapore Journal of Scientific Research | 2020 | Mr. Jamal Hossen | Paper Link |
| Effect of Shade Depth on Lea Strength, Weight Loss and Wash Fastness Properties of Reactive Dyed Cotton Yarn | Journal Article | Daffodil International University Journal of Science and Technology | 2020 | Ms. Sharmin Akter | Paper Link |
| Esterification of starch in search of a biodegradable thermoplastic material | Journal Article | Journal of Polymer Research | 2020 | Mr. Md. Ruhul Amin | Paper Link |
| Esterification of starch in search of a biodegradable thermoplastic material | Journal Article | Journal of Polymer Research | 2020 | Mr. Shahriar Raian | Paper Link |
| Esterification of starch in search of a biodegradable thermoplastic material | Journal Article | Journal of Polymer Research | 2020 | Mr. Md. Arif Mahmud | |
| Exploration of Sustainability Barriers and Success Factors in the Textile and Ready-Made Garments Producer Level- Bangladesh Perspectives. | Conference Proceedings | International Conference on Arts, Education, and Business (ICAEB-20) | 2020 | Dr. Lal Mohan Baral | |
| Exploration of Sustainability Barriers and Success Factors in the Textile and Ready-Made Garments Producer LevelBangladesh Persp ectives | Conference Proceedings | International Conference on Arts, Education and Business (ICAEB-2O) | 2020 | Ms. Nasrin Akter | |
| Exploring weft knit fabric defects based on their presence and quality impact: A case study | Journal Article | Communications in Development and Assembling of Textile Products(CDATP) | 2020 | Dr. A. K. M. Mobarok Hossain | Paper Link |
| Fabrication and characterization of stretchable denim fabric using core spun yarn | Journal Article | Heliyon | 2020 | Ms. Nasrin Akter | |
| Generating Melange Effect on Cotton Polyester Blended Fabric in a Cost Effective Manner | Conference Proceedings | Generating Melange2nd International Conference on Sustainable Technologies for Industry 4.0 | 2020 | Mr. Mohammad Ashraful Alam | |
| Highly stretchable electro-conductive yarn via wrapping carbon nanotube yarn on multifilament polyester yarn | Journal Article | Journal of Industrial Textiles | 2020 | Dr. Farial Islam Farha | |
| Identification of the Significance and Relevant Barriers of Sustainability Aspects at the Workers’ Level in the Garments Industry of Bangladesh | Journal Article | International Journal of Innovative Research in Engineering & Management | 2020 | Mr. Amit Chakrabortty | Paper Link |
| Identification of the Significance and Relevant Barriers of Sustainability Aspects at the Workers’ Level in the Garments Industry of Bangladesh | Journal Article | International Journal of Innovative Research in Engineering & Management (IJIREM) | 2020 | Mr. Md. Zulfikar Hasan | Paper Link |
| Impact of Blend Ratio on Cotton-modal Blended ring-spun Yarn Quality with Varying Modal Fibre percentage | Journal Article | International Research Journal of Applied Sciences | 2020 | Mr. Jamal Hossen | Paper Link |
| Impact of Blend Ratio on Cotton-modal Blended Ring-spun Yarn Quality with Varying Modal Fibre Percentage | Journal Article | International Research Journal of Applied Sciences | 2020 | Mr. Subrata Kumar Saha | Paper Link |
| Impact of Doubling and Auto leveling in Draw Frame on the Quality of Rotor-Spun Yarns | Journal Article | Trends in Textile Engineering & Fashion Technology | 2020 | Mr. Subrata Kumar Saha | Paper Link |
| Impact of Doubling and Auto leveling in Draw Frame on the Quality of Rotor-Spun Yarns | Journal Article | Trends in Textile Engineering and Fashion Technology | 2020 | Mr. Jamal Hossen | Paper Link |
| Impact of Front and Back Roller Shore Hardness on The Quality of Cotton Carded Yarn in Ring Spinning Frame | Journal Article | Trends in Textile Engineering & Fashion Technology | 2020 | Mr. Amit Chakrabortty | Paper Link |
| Impact of Front and Back Roller Shore Hardness on The Quality of Cotton Carded Yarn in Ring Spinning Frame | Journal Article | Trends in Textile Engineering & Fashion Technology | 2020 | Mr. Md. Zulfikar Hasan | |
| Impact of Front and Back Roller Shore Hardness on The Quality of Cotton Carded Yarn in Ring Spinning Frame | Journal Article | Trends in Textile Engineering & Fashion Technology | 2020 | Mr. Md. Redwanul Islam | Paper Link |
| Improving the Drive Belt Cleaning System for the Positive Feed Mechanism of Circular Weft Knitting Machine : A Noble Approach | Journal Article | Vlákna a textil (Fibres and Textiles) | 2020 | Dr. A. K. M. Mobarok Hossain | Paper Link |
| Influence of 3D CAD in Apparel Industry as a Prominent Tool for Garment Fitting | Journal Article | International Journal of Innovative and Applied Science | 2020 | Mr. Mohammad Ashraful Alam | Paper Link |
| Influence of dispersing agents on adsorption and desorption rate of a disperse dye on polyester | Journal Article | Journal of Textile Engineering and Fashion Technology | 2020 | Ms. Sonia Hossain | Paper Link |
| Influence of dispersing agents on adsorption and desorption rate of a disperse dye on polyester | Journal Article | Journal of Textile Engineering & Fashion Technology | 2020 | Mr. Md. Koushic Uddin | Paper Link |
| Investigation on mechanical properties and water absorbency of jute glass reinforced epoxy composite | Journal Article | Journal of Textile Engineering and Fashion Technology | 2020 | Ms. Sonia Hossain | Paper Link |
| Investigation on mechanical properties and water absorbency of jute glass reinforced epoxy composite | Journal Article | Journal of Textile Engineering & Fashion Technology | 2020 | Mr. Md. Koushic Uddin | Paper Link |
| Isolation and Extraction of Chitosan from Shrimp Shells | Journal Article | International Journal of Advanced Research | 2020 | Ms. Sonia Hossain | Paper Link |
| Isolation and extraction of chitosan from shrimp shells | Journal Article | International Journal of Advanced Research | 2020 | Mr. Md. Koushic Uddin | Paper Link |
| Optimization of Residual Shrinkage Control of 100% Cotton Woven Fabric Through Sanforization | Journal Article | Journal of Textile Science & Fashion Technology | 2020 | Mr. Md. Ershad Khan | |
| Optimization of vat dyeing with a new reducing agent (orange peel extract) using response surface methodology | Journal Article | AATCC Journal of Research | 2020 | Dr. Mohammad Tajul Islam | Paper Link |
| Performance analysis of spandex incorporated single jersey fabrics for sportswear | Journal Article | Indian Journal of Science and Technology | 2020 | Ms. Nasrin Akter | |
| Polymers for Textile Production | Book | Frontiers of Textile Materials | 2020 | Dr. Mohammad Tajul Islam | Paper Link |
| Study on Fabric and Seam Strength Loss of Denim Trousers for Different Washing Treatments | Journal Article | Journal of Textile Science and Technology | 2020 | Mr. Mohammad Faizur Rahman | |
| Study on the Effect of Air Suction Pressure on the Quality of Compact Yarn by Changing the Frequency of Inverter | Journal Article | TEKSTİL VE MÜHENDİS ( Journal of Textile and Engineer) | 2020 | Mr. Amit Chakrabortty | Paper Link |
| Synchronization of Thermal Properties and Constituents in Nanocomposite: Manufacturing, Characterization, Adjustable Properties | Journal Article | Journal of Applied Polymer Science | 2020 | Mr. Rashed Al Mizan | Paper Link |
| Time-Based Process Mapping for Lead Time Compression in the Apparel Supply Chain: A Case Study | Journal Article | International Journal of Mathematical, Engineering and Management Sciences | 2020 | Dr. Chowdhury Jony Moin | Paper Link |
| A promising approach to predict Areal Density of 1×1 Rib fabric using Mathematical and Fuzzy Inference Model | Conference Proceedings | Sino-Africa International Symposium on Textiles and Apparel 2019 | 2019 | Dr. Farial Islam Farha | |
| Addressing the gender issues for Sustainable Development of Garment Sector in Bangladesh: A Tri partite model | Conference Proceedings | International Conference on Sustaining Global Garment Industries (ICSG2i2019) | 2019 | Dr. Lal Mohan Baral | |
| An Ingenious Approach of Incorporating Sustainability Issues within Textile Engineering Curriculum of Bangladesh | Conference Proceedings | International Conference on Sustainable Technologies for Industry 4.0 (STI 2019) | 2019 | Dr. Lal Mohan Baral | |
| Analysis the Physical Properties of Twill Derivatives: A Case Study | Journal Article | Journal of Textile Science & Fashion Technology | 2019 | Ms. Nasrin Akter | |
| Building up a sustainable relationship between employee and employer of the RMG (Readymade Garment) sector of Bangladesh | Conference Proceedings | International Scientific Conference on Sustainability of Global Garment Industry | 2019 | Mr. Mohammad Faizur Rahman | |
| Building up a sustainable relationship between employee and employer of the RMG (Readymade Garment) sector of Bangladesh | Conference Proceedings | International Conference on Sustaining Global Garment Industries (ICSG2i2019) | 2019 | Dr. Lal Mohan Baral | |
| Challenges of Quality assurance –A Case Study of Women Entrepreneurs in the Garment Sector of Bangladesh | Conference Proceedings | International Conference on Sustaining Global Garment Industries (ICSG2i2019) | 2019 | Dr. Lal Mohan Baral | |
| Compositional and Structural Influence on some Weft Knitted Fabrics Comprised of Cotton and Lyocell Yarn | Journal Article | Journal of The Institution of Engineers (India): Series E | 2019 | Dr. Farial Islam Farha | |
| Compositional and Structural Influence on Some Weft-Knitted Fabrics Comprised of Cotton and Lyocell Yarn | Journal Article | Journal of The Institution of Engineers (India): Series E | 2019 | Mr. Md. Arif Mahmud | |
| Densely packed, highly strain sensitive carbon nanotube composites with sufficient polymer penetration | Journal Article | Composites Part A: Applied Science and Manufacturing | 2019 | Dr. Farial Islam Farha | |
| Development of Garment Design Module for Sustainable Product Development | Conference Proceedings | International Conference on Sustaining Global Garment Industries (ICSG2i2019) | 2019 | Dr. Lal Mohan Baral | |
| Development of New Convertible Portable Shelter Combining Tent and Tarp Having Improved Features | Conference Proceedings | International Scientific Conference on Sustainability of Global Garment Industry | 2019 | Mr. Mohammad Faizur Rahman | |
| Development of New Convertible Portable Shelter Combining Tent and Tarp having Improved Features | Conference Proceedings | International Conference on Sustaining Global Garment Industries (ICSG2i2019) | 2019 | Dr. Lal Mohan Baral | |
| Developments in Flame-Retardant Bio-composite Material Production | Journal Article | Advances in Civil Engineering Materials | 2019 | Mr. Md. Arif Mahmud | |
| Effect of Blend Ratio on Quality Characteristics of Polyester/Cotton Blended Ring Spun Yarn | Journal Article | Trends in Textile Engineering & Fashion Technology | 2019 | Mr. Kazi Rezwan Hossain | Paper Link |
| Environmentally-Friendly Textile Finishing | Book | Textiles and Clothing: Environmental Concerns and Solutions | 2019 | Dr. Mohammad Tajul Islam | Paper Link |
| Exploration of Sustainability Gaps in the Textile Engineering Curriculum of Bangladesh | Conference Proceedings | 10th ICTEL 2019 International Conference on Teaching, Education & Learning | 2019 | Dr. Lal Mohan Baral | |
| Exploration of Sustainability Gaps in the Textile Engineering Curriculum of Bangladesh” | Conference Proceedings | 10th ICTEL 2019 – International Conference on Teaching, Education & Learning | 2019 | Mr. Mohammad Faizur Rahman | |
| Fabrication and characterisation of 3-dimensional electrospun nanofibrous scaffolds | Conference Proceedings | 9th Advanced Materials and Nanotechnology, AMN9 | 2019 | Dr. Mohammad Tajul Islam | |
| Fibrous Impact on Several Primary Characteristics of 3-thread Fleece Fabric | Journal Article | AATCC Journal of Research | 2019 | Dr. Farial Islam Farha | |
| Green Merchandising”- A Sustainable Approach for Apparel Business: A Review Paper | Journal Article | DAFFODIL INTERNATIONAL UNIVERSITY JOURNAL OF SCIENCE AND TECHNOLOGY | 2019 | Mr. Kazi Rezwan Hossain | Paper Link |
| Health and Safety Issues in Sustainable Spinning Industry | Conference Proceedings | International Scientific Conference on Sustainability of Global Garment Industry | 2019 | Mr. Mohammad Faizur Rahman | |
| Health and Safety Issues in Sustainable Spinning Industry | Conference Proceedings | International Conference on Sustaining Global Garment Industries (ICSG2i2019) | 2019 | Dr. Lal Mohan Baral | |
| Highly Effective E-heating Performance of Nickel Coated Carbon Fiber and its Composites for De-icing application | Journal Article | Composite Structures | 2019 | Dr. Farial Islam Farha | |
| Impact of bleaching actions of bleaching powder and hydrogen peroxide on biopolished denim garments | Journal Article | Tekstil | 2019 | Ms. Marzia Islam | |
| Implementation of Westinghouse system in garments production process to determine the workers performance rating accurately | Conference Proceedings | International Scientific Conference on Sustainability of Global Garment Industry | 2019 | Mr. Mohammad Faizur Rahman | |
| Implementation of Westinghouse system in garments production process to determine the workers performance rating accurately | Conference Proceedings | International Conference on Sustaining Global Garment Industries (ICSG2i2019) | 2019 | Dr. Lal Mohan Baral | |
| Improvement of Sustainable Geo-Jute Designed for Geo-Technical Purposes through Chemical Treatment | Conference Proceedings | International Scientific Conference on Sustainability of Global Garment Industry | 2019 | Mr. Mohammad Faizur Rahman | |
| Influence of ergonomics and its impact on sewing machine operators’ musculoskeletal disorders in lean environment in the RMG industry of Bangladesh | Conference Proceedings | International Conference on Sustaining Global Garment Industries (ICSG2i2019) | 2019 | Dr. Lal Mohan Baral | |
| Influence of Ultraviolet Irradiation and Protease on Scale Structure of Alpaca Wool Fibers | Journal Article | Autex Research Journal | 2019 | Dr. Farial Islam Farha | |
| Integration of Sustainability within Textile Engineering Curriculum of Bangladesh-A Prime Need and Achievement | Conference Proceedings | The 2nd International conference on Industrial and Mechanical Engineering and Operations Management (IMEOM-2019), | 2019 | Dr. Lal Mohan Baral | |
| Investigation on the spinability of fine areca fiber | Journal Article | The Journal of The Textile Institute | 2019 | Mr. Subrata Kumar Saha | Paper Link |
| Mathematical Logic Establishment for Automated Trash Controlling in Carding Machine | Journal Article | EUROPEAN SCIENTIFIC JOURNAL, ESJ | 2019 | Mr. Md. Redwanul Islam | Paper Link |
| Mechanisms and kinetics of silver nanoparticle release from polyvinyl alcohol/keratin/chitosan electrospun nanofibrous scaffold | Conference Proceedings | 19th world textile conference, Autex 2019 | 2019 | Dr. Mohammad Tajul Islam | |
| Natural Fiber Reinforced Starch Based Biocomposites | Journal Article | Polymer Science, Series A | 2019 | Mr. Md. Ruhul Amin | Paper Link |
| Natural Fiber Reinforced Starch Based Biocomposites | Journal Article | Polymer Science, Series A | 2019 | Mr. Md. Arif Mahmud | |
| Optimization of Process Parameters for Dyeing Jute-Cotton Blend Fabric with Reactive Dyes using Box-Behnken Experimental Design | Conference Proceedings | International Scientific Conference: Sustainability of Global Garment Industry (ICSG2i-2019) | 2019 | Mr. Muksit Ahamed Chowdhury | |
| Optimization Of Raw Material Mixing In Rotor Spun Yarn Using Analytical Hierarchy Process | Journal Article | INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH | 2019 | Mr. Shahriar Raian | Paper Link |
| Reflections of Practical Wisdom in Decision Making: An Integrative Approach to Corporate Sustainability Management | Conference Proceedings | International Conference on Sustaining Global Garment Industries (ICSG2i2019) | 2019 | Dr. Lal Mohan Baral | |
| Surface Modification and Bioconjugation of Nanoparticles for MRI Technology | Book | Surface Modification of Nanoparticles for Targeted Drug Delivery | 2019 | Dr. Mohammad Tajul Islam | Paper Link |
| Sustainability in Textile Engineering Education for Sustainable Textile Industry of Bangladesh | Conference Proceedings | International conference on Textile Engineering 2019 | 2019 | Dr. Lal Mohan Baral | |
| Sustainable Knit Garment Manufacturing: A Review of Cost Analysis through Material Flow Cost Accounting | Conference Proceedings | International Conference on Sustaining Global Garment Industries (ICSG2i2019) | 2019 | Dr. Lal Mohan Baral | |
| Sustainable Supply chain for Sustainable Garments Industry | Conference Proceedings | International Conference on Sustaining Global Garment Industries (ICSG2i2019) | 2019 | Dr. Lal Mohan Baral | |
| Synergism of Thermal Conductivity Enhancement in Binary Polymer Matrix by Binary Nano Particle Reinforced Composite | Conference Proceedings | 658th International Conference Engineering, Technology and Innovation, Saint Petersburg, Russia | 2019 | Mr. Rashed Al Mizan | Paper Link |
| “Fatigue Life Dependency on the Cleanliness and Ductility of Structural Steels”, published in Proceedings of 4th International Conference On Structure, Processing and Properties of Materials | Conference Proceedings | 4th International Conference on Structure, Processing and Properties of Materials (SPPM 2018) 1–3 March 2018, Dhaka, Bangladesh | 2018 | Mr. Rashed Al Mizan | Paper Link |
| A Pairwise Comparison among Different Quality Parameters of Rotor Spun Yarn with Changing in Different Rotor Speeds by Using Regression Analysis | Journal Article | International Journal of Textile Science | 2018 | Mr. Shahriar Raian | Paper Link |
| An efficient methodology for robust assignment problem | Journal Article | International Journal of Operational Research | 2018 | Mr. Subrata Kumar Saha | Paper Link |
| Analysis of Labor Law Practice on conomic sustainability in Ready-Made Garments Industries in Bangladesh | Journal Article | International Journal of Scientific Engineering and Applied Science (IJSEAS) | 2018 | Ms. Sharmin Akter | Paper Link |
| Analysis on garments buying behavior of textile engineering students-A study in Bangladesh | Journal Article | Elixir International Journal | 2018 | Ms. Sharmin Akter | Paper Link |
| Augmentation of Thermal Conductivity for Polypropylene / Ethylene-Vinyl Acetate Based Composites Filled by Organic and Inorganic Particles | Journal Article | Universal Journal of Materials Science | 2018 | Mr. Rashed Al Mizan | Paper Link |
| Characterization of Bamboo Composites Underscoring Node Effects | Conference Proceedings | The 91st Textile Institute World Conference | 2018 | Mr. Rashed Al Mizan | Paper Link |
| Characterization of bamboo fibers underscoring node effects | Conference Proceedings | The 91st Textile Institute World Conference | 2018 | Mr. Rashed Al Mizan | Paper Link |
| Controlled Fading of Soluble Sulphur Dyed Cotton Fabric by Oxidation Discharge Printing | Journal Article | Journal of Textile Engineering & Fashion Technology (JTEFT) | 2018 | Mr. Mohammad Mahbubul Alam | Paper Link |
| Controlled fading of soluble sulphur dyed cotton fabric by oxidation discharge printing | Journal Article | Journal of Textile Engineering & Fashion Technology | 2018 | Mr. Md. Koushic Uddin | |
| Controlled fading of soluble sulphur dyed cotton fabric by oxidation discharge printing | Journal Article | Journal of Textile Engineering and Fashion Technology 2018;4(3):215‒219 | 2018 | Mr. Md. Ershad Khan | Paper Link |
| Development of Modified Starch Coated Jute Fabric | Journal Article | Journal of The Institution of Engineers (India): Series E | 2018 | Mr. Md. Arif Mahmud | |
| Effect of Bitumen Emulsion and Polyester Resin Mixture on the Physico-Mechanical and Degradable Properties of Jute Fabrics | Journal Article | Fibres | 2018 | Ms. Nasrin Akter | |
| Effect of Lattice Apron Age on the Quality of Compact Ring Spun Yarns | Journal Article | Trends in Textile Engineering and Fashion Technology | 2018 | Mr. Jamal Hossen | Paper Link |
| Effect of Lattice Apron Age on the Quality of Compact Ring-Spun Yarns | Journal Article | Trends in Textile Engineering & Fashion Technology | 2018 | Mr. Shahriar Raian | Paper Link |
| Effect of machine speed on yarn input tension and ‘on- machine’ course length for a circular weft knitting machine with positive storage feeding | Journal Article | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) | 2018 | Dr. A. K. M. Mobarok Hossain | Paper Link |
| Evaluating the performance of gamma irradiated okra fiber reinforced polypropylne (PP) composites | Journal Article | Fashion and Textiles | 2018 | Mr. Jamal Hossen | Paper Link |
| Evaluation of Impact of Yarn Count and Stitch Length on Pilling, Abrasion, Shrinkage and Tightness Factor of 1 × 1 Rib Cotton Knitted Fabrics | Journal Article | Journal of Textile Science & Engineering | 2018 | Ms. Nasrin Akter | |
| Fabrication, Mechanical Characterization and Interfacial Properties of Okra Fiber Reinforced Polypropylene Composites | Journal Article | International Journal of Engineering Materials and Manufacture | 2018 | Mr. Md. Ershad Khan | Paper Link |
| Fabrication, mechanical characterization and interfacial properties of Okra fiber reinforced polypropylene composites | Journal Article | International Journal of Engineering Materials and Manufacture | 2018 | Mr. Sheikh Nazmul Hoque | |
| Factors Affecting Workers Rating of Sewing Operator | Journal Article | nternational Journal of Current Engineering and Technology | 2018 | Ms. Sharmin Akter | Paper Link |
| Fatigue Life Dependency on the Cleanliness and Ductility of Structural Steels | Journal Article | IOP Conference Series: Materials Science and Engineering | 2018 | Mr. Rashed Al Mizan | Paper Link |
| Implementation of an operating procedure for quality control at production level in a RMG industry and assessment of quality improvement | Journal Article | The journal of the Textile Institute | 2018 | Dr. Chowdhury Jony Moin | Paper Link |
| Improvement of overall equipment efficiency of ring frame through total productive maintenance: a textile case | Journal Article | The International Journal of Advanced Manufacturing Technology | 2018 | Mr. Jamal Hossen | Paper Link |
| Investigating the Physical Properties of Treated and Untreated Jute Fibre-Polyester Composites | Journal Article | Asian Journal of Textile | 2018 | Dr. Mohammad Tajul Islam | Paper Link |
| Investigating the Physical Properties of Treated and Untreated Jute Fibre-Polyester Composites | Journal Article | Asian Journal of Textile | 2018 | Mr. Jamal Hossen | Paper Link |
| Optimisation of 3-dimensional electrospun poly(vinyl alcohol)/keratin/chitosan nanofibrous scaffolds | Conference Proceedings | 3rd International Conference on Emerging Advanced Nanomaterials | 2018 | Dr. Mohammad Tajul Islam | |
| Performance Evaluation of a Circular Weft Knitting Machine Through Observation of Yarn Input Tension: A Case Study | Journal Article | Annals of the University of Oradea. Fascicle of Textiles, Leatherwork | 2018 | Dr. A. K. M. Mobarok Hossain | Paper Link |
| Performance variation with time of apparel sewing workers: a case study | Journal Article | European Scientific Journal | 2018 | Dr. Chowdhury Jony Moin | Paper Link |
| Problem Based Learning (PBL) for the Sustainability of Textile Engineering Education - Bangladesh Perspective | Conference Proceedings | 7th International Research Symposium on PBL (IRSPBL) | 2018 | Mr. Mohammad Faizur Rahman | |
| Problem Based Learning (PBL) for the Sustainability of Textile Engineering Education - Bangladesh Perspective | Conference Proceedings | The 7th International Research Symposium on PBL (IRSPBL) | 2018 | Dr. Lal Mohan Baral | Paper Link |
| Thermal Conductivity Enhancement of Polypropylene Based Composites Filled by Organic and Inorganic Particles. | Conference Proceedings | 4th International Conference on Structure, Processing and Properties of Materials (SPPM 2018) 1–3 March 2018, Dhaka, Bangladesh | 2018 | Mr. Rashed Al Mizan | Paper Link |
| A case study on line balancing techniques for apparel sewing line. | Conference Proceedings | 1st International Conference on Industrial and Mechanical Engineering and Operations Management (IMEOM) | 2017 | Dr. Chowdhury Jony Moin | Paper Link |
| A Review on Ultraviolet Protection of Textiles | Journal Article | International Journal of Engineering Technology Science and Research (IJETSR) | 2017 | Mr. Mohammad Mahbubul Alam | Paper Link |
| An application of Pareto analysis and cause-and-effect diagram (CED) to examine stoppage losses: a textile case from Bangladesh | Journal Article | The Journal of the Textile Institute | 2017 | Mr. Jamal Hossen | Paper Link |
| Analysis on the proper utilization of man and machine to improve the efficiency and a proper line balancing of a sewing line: A case study | Journal Article | International Journal of Scientific & Engineering Research | 2017 | Mr. Kazi Rezwan Hossain | Paper Link |
| Assessment of labor skill and development of labor skill matrix for sewing section of an apparel industry. | Conference Proceedings | 4th International Conference on Mechanical Engineering and Renewable Energy, ICMERE-2017, Chittagong, | 2017 | Dr. Chowdhury Jony Moin | Paper Link |
| Dyeing Effects of Wool/Acrylic Blended Yarn in One-bath and Two-bath Process Using 1:2 Pre-metallised and Basic Dyes | Journal Article | International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET) | 2017 | Mr. Mohammad Mahbubul Alam | Paper Link |
| Effect of Garment Size Ratio and Marker Width Variation on Marker Efficiency for both Manual and Computerized Marker | Journal Article | 2017 | Mr. Md. Zulfikar Hasan | ||
| Effect of Garment Size Ratio and Marker Width Variation on Marker Efficiency for both Manual and Computerized Marker | Journal Article | European Journal of Advances in Engineering and Technology | 2017 | Mr. Mohammad Faizur Rahman | Paper Link |
| Efficacy of whip roller setting on physical attributes of denim fabric | Journal Article | Fashion and Textiles | 2017 | Dr. Farial Islam Farha | |
| Evaluation of shrinkage behavior of some major commercial single knit structures knitted with cotton and cotton/polyester blended yarns | Journal Article | International Journal of Textile and Fashion Technology (IJTFT) | 2017 | Dr. A. K. M. Mobarok Hossain | Paper Link |
| Improvement of Moisture Management of Polyester Fabric Using Moisture Management Chemical | Journal Article | International Journal of Engineering Technology, Management and Applied Sciences (IJETMAS) | 2017 | Mr. Mohammad Mahbubul Alam | Paper Link |
| Improvement of Sustainable Geo-Jute Designed for Geo-Technical Purposes through Chemical Treatment | Conference Proceedings | 2017 | Ms. Nasrin Akter | ||
| Maximising the purchaser's satisfaction through supply chain upstream management | Journal Article | International Journal of Operational Research | 2017 | Dr. Chowdhury Jony Moin | Paper Link |
| Precision Prediction of Knitted Fabric Loop Length through Online Monitoring of Yarn Input Tension and Course Length-A Mathematical Approach for Circular Weft Knitting With Positive Storage Feeding | Journal Article | European Scientific Journal | 2017 | Dr. A. K. M. Mobarok Hossain | Paper Link |
| A Comparative Study on the Effect of Different Types of Dry Cleaning Solvent on the Physical Properties of Garments | Journal Article | International Journal of Textile Science | 2016 | Mr. Md. Zulfikar Hasan | |
| Aloe veragel: a new thickening agent for pigment printing | Journal Article | Coloration Technology | 2016 | Dr. Mohammad Tajul Islam | Paper Link |
| Comparative Study of Effect of Stitch Length and Yarn Count on Fabric Width and Stiffness of Different Weft Knitted Single Jersey Structures | Journal Article | European Journal of Advances in Engineering and Technology | 2016 | Mr. Emdadul Haque | |
| Comparative Study on the Effect of Sewing Thread Count For Different Types of Seam | Journal Article | 2016 | Mr. Md. Zulfikar Hasan | ||
| Effect of Chemical Concentration on the Pre-treatment Performance of Cotton Woven Fabric | Journal Article | International Journal of Current Engineering and Technology | 2016 | Dr. Farial Islam Farha | |
| Effect of Individualized Cellulose Fibrils on Properties of Poly(Methyl Methacrylate) Composites | Journal Article | Journal of Macromolecular Science Part B-Physics | 2016 | Dr. Mohammad Tajul Islam | Paper Link |
| Effect of stitch density on seam quality of garments | Conference Proceedings | International conference on REDEFINING TEXTILES CUTTING EDGE TECHNOLOGY OF THE FUTURE (RTCT-2016) | 2016 | Mr. Mohammad Faizur Rahman | |
| Effect of Stitch Lengths and Yarn Counts on Areal Density and Drape Behaviour of Different Weft Knitted Single Jersey Structures. | Journal Article | American Journal of Applied Scientific Research | 2016 | Mr. Emdadul Haque | |
| Effect of the use of cad and cam technologies in garments production | Conference Proceedings | International Textile Conference on Redefining Textiles | 2016 | Dr. Mohammad Tajul Islam | |
| Influence of different chemical treatments on the properties of PC fabric used as lining | Journal Article | International Journal of Clothing Science and Technology | 2016 | Dr. Mohammad Tajul Islam | Paper Link |
| Investigation of Color Parameters and Fastness Properties on Different Knitted Fabric Structures Dyed with Reactive Dyes | Conference Proceedings | Annals of the University of Oradea | 2016 | Mr. Emdadul Haque | |
| Review of Renewable Biosorbent from Coir Pith Waste for Textile Treatment | Journal Article | International Journal of Textile Science | 2016 | Mr. Muksit Ahamed Chowdhury | |
| Tensile Behaviour of Structurally Gradient Braided Prostheses for Anterior Cruciate Ligaments | Journal Article | Journal of the mechanical behavior of biomedical materials | 2016 | Mr. Siyam Quddus Khan | Paper Link |
| Topologically controlled tensile behaviour of braided prostheses for anterior cruciate ligaments | Journal Article | Journal of the mechanical behavior of biomedical materials | 2016 | Mr. Siyam Quddus Khan | Paper Link |
| Analysis of Pilling Performance of different Fabric Structures with respect to Yarn Count and Pick density | Conference Proceedings | Annals of the University of Oradea, Fascicle of Textiles, Leatherwork | 2015 | Mr. Md. Ruhul Amin | Paper Link |
| Effect of Knitted Structure on the Properties of Knitted Fabric | Journal Article | International Journal of Science and Research (IJSR) | 2015 | Dr. Farial Islam Farha | |
| Environment-friendly reactive dyeing process for cotton to substitute dyeing additives | Journal Article | Clean Technologies and Environmental Policy | 2015 | Dr. Mohammad Tajul Islam | Paper Link |
| Improving photostability of thermochromic colorants with ultraviolet absorbers and hindered amine light stabilizers | Journal Article | Journal of Textile and Apparel, Technology and Management | 2015 | Mr. Muksit Ahamed Chowdhury | |
| Influence on Dimensional Changes of Cotton Plain Single Jersey Weft Knitted Fabric at Different Relaxed States Due to the Variation of Knitting Parameters | Journal Article | The AUST Journal of Science and Technology | 2015 | Mr. Sheikh Nazmul Hoque | |
| Predicting total assembling time for different apparel products utilizing learning curve and time study approaches: A comparative case study | Conference Proceedings | The annual meeting of the International Textile and Apparel Association (ITAA) | 2015 | Mr. Mohammad Faizur Rahman | |
| Use of N-methylformanilide as swelling agent for meta-aramid fibers dyeing: Kinetics and equilibrium adsorption of Basic Blue 41 | Journal Article | Dyes and Pigments | 2015 | Dr. Mohammad Tajul Islam | Paper Link |
| Visitation of Yarn Twist on Divers Properties of Cotton Knitted Single Jersey Fabric | Journal Article | International Journal of Current Engineering and Technology | 2015 | Dr. Farial Islam Farha | |
| Assessing the impact of DMAIC- Knowledge Management Methodology on Six Sigma Projects: An Evaluation through Participant’s Perception | Conference Proceedings | The 7th International Conference on Knowledge Science, Engineering and Management, KSEM 2014 | 2014 | Dr. Lal Mohan Baral | |
| Effect of Heald Shafts Position on Fabric Properties | Journal Article | Published in Bangladesh Journal of Textile Science & Engineering (BJTSE) | 2014 | Mr. Md. Ruhul Amin | |
| Evaluating the integrated performance of two CAD systems applied in garments manufacturing process | Conference Proceedings | The International Conference on Mechanical, Industrial and Energy Engineering 2014 | 2014 | Dr. Lal Mohan Baral | |
| Improving Photostability of Thermochromic Colorants with Ultraviolet Absorber and Hindered Amine Light Stabilizer | Conference Proceedings | Textile Research Conference | 2014 | Mr. Muksit Ahamed Chowdhury | |
| Phtochromic and Thermochromic Colorants in Textile Application | Journal Article | Journal of Engineered Fibre and Fabrics | 2014 | Mr. Muksit Ahamed Chowdhury | |
| Preparation of Nanocellulose: A Review | Journal Article | AATCC Journal of Research | 2014 | Mr. Mohammad Mahbubul Alam | Paper Link |
| Preparation of Nanocellulose: A Review | Journal Article | AATCC Journal of Research | 2014 | Dr. Mohammad Tajul Islam | Paper Link |
| Preparing Smart Students Through Performing Problem Based Learning Activities Within University- Industry Collaborative Knowledge Sharing Platform. | Conference Proceedings | The 3rd International Conference on Engineering and Technology Education & 7th Balkan Region Conference on Engineering and Business Education | 2014 | Dr. Lal Mohan Baral | |
| Review of Knowledge Management Models for Implementation within Advanced Product Quality Planning | Conference Proceedings | The 7th International Conference on Knowledge Science, Engineering and Management, KSEM 2014 | 2014 | Dr. Lal Mohan Baral | |
| A Study on different approaches of six-sigma and knowledge management integrated models to identify the leveraging effects. | Conference Proceedings | The 1st International Conference for Doctoral Students IPC- 2013 | 2013 | Dr. Lal Mohan Baral | |
| An integrated DMAIC- Knowledge Management conceptual model for Six Sigma quality management | Conference Proceedings | The 6th International Conference on Manufacturing Science and Education-MSE 2013 | 2013 | Dr. Lal Mohan Baral | |
| Application of Thermochromic Colorant on Textile: Temperature dependence of Chlorimetric Property | Journal Article | Coloration Technology | 2013 | Mr. Muksit Ahamed Chowdhury | |
| Assessing Impact of Problem Based Learning (PBL) On Six Sigma Projects Associated with Textile Engineering Education | Conference Proceedings | The International Engineering and Technology Education Conference (IETEC) 2013 | 2013 | Dr. Lal Mohan Baral | |
| Development of Responsive Camouflage Textile using Thermochromic and Non-thermochromic Colorants | Journal Article | BUFT Journal | 2013 | Mr. Muksit Ahamed Chowdhury | |
| GSP (Generalized System of Preferences) What Bangladesh Thinks? | Others | Apparel Views (Bangladesh Edition) | 2013 | Mr. Mohammad Faizur Rahman | |
| Implementation of analytical hierarchy process (AHP) for upstream management of apparel supply chain | Others | 2013 | Dr. Chowdhury Jony Moin | Paper Link | |
| Investigation of a Hybrid Production System for Mass-Customization Apparel Manufacturing. | Journal Article | Journal of Textile and Apparel, Technology and Management | 2013 | Dr. Chowdhury Jony Moin | Paper Link |
| Kinetics and Equilibrium Studies of Sorption of Remazol G Yellow RGB (An Anionic Reactive Dye) Onto Acid Activated Vegetable Kitchen Waste | Journal Article | International Journal of Environmental Pollution Control and Management | 2013 | Dr. Mohammad Tajul Islam | |
| Knowledge creation scope within Six Sigma project implemented in Textile Manufacturing | Conference Proceedings | The 6th International Conference on Manufacturing Science and Education-MSE 2013 | 2013 | Dr. Lal Mohan Baral | |
| Knowledge Management Platform in Advanced Product Quality Planning | Conference Proceedings | The 1st International Conference for Doctoral Students IPC- 2013 | 2013 | Dr. Lal Mohan Baral | |
| Quality System for Production Software (QSPS): An innovative approach to improve the quality of production software | Journal Article | International Journal of Software Engineering and Knowledge Engineering (IJSEKE) | 2013 | Dr. Lal Mohan Baral | |
| REVIEW on MODIFICATION of NANOCELLULOSE for APPLICATION in COMPOSITES | Journal Article | International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET) | 2013 | Mr. Mohammad Mahbubul Alam | Paper Link |
| Review on Modification of Nanocellulose for Application in Composites | Journal Article | International Journal of Innovative Research in Science, Engineering and Technology | 2013 | Dr. Mohammad Tajul Islam | Paper Link |
| A case study on the acceptance quality level (AQL) for woven garments quality inspection | Conference Proceedings | The International Conference “Innovative solutions for sustainable development of textiles industries | 2012 | Dr. Lal Mohan Baral | |
| An Interdisciplinary Approach to Smart Textile Design using Thermochromic, Photochromic & Conventional Pigments | Journal Article | Institutional Engineering Technology | 2012 | Mr. Muksit Ahamed Chowdhury | |
| Analysis of cotton yarn count variation by two way ANOVA | Conference Proceedings | Annals of the University of Oradea, Fascicle of Textiles, Leatherwork | 2012 | Mr. Subrata Kumar Saha | |
| Analysis of Cotton Yarn Count Variation by Two Ways ANOVA | Conference Proceedings | Annals of the University of Oradea | 2012 | Mr. Emdadul Haque | |
| Analysis of cotton yarn count variation by two-way ANOVA | Conference Proceedings | Annals of the University of Oradea, Romania. | 2012 | Mr. Jamal Hossen | |
| Assessment of the process stability of cotton yarn count by means of variable and attribute control chart | Journal Article | Journal of Innovation & Development Strategy (JIDS). | 2012 | Mr. Jamal Hossen | Paper Link |
| Assessment of the process stability of cotton yarn count by means of variable and attribute control chart on a spinning mill | Journal Article | Journal of Innovation & Development Strategy | 2012 | Mr. Subrata Kumar Saha | Paper Link |
| Bio-technology in Textile Textile Effluent Treatment | Journal Article | Textile Review | 2012 | Mr. Muksit Ahamed Chowdhury | |
| Effect of stitch length and yarn count on grey and finished widths of 1x1 Flat Knit Rib Fabric | Journal Article | Annals of University of Oradea, Fascicle of Textiles, Leatherwork | 2012 | Mr. Mohammad Faizur Rahman | |
| Effect of Stitch Length and Yarn Count on Grey and Finished Widths of 1x1 Flat Knit Rib Fabric | Conference Proceedings | Annals of the University of Oradea | 2012 | Mr. Emdadul Haque | |
| Evaluating the effectiveness of Problem-Based Learning (PBL) implemented in the textile engineering course- A case study on Ahsanullah University of Science and Technology, Bangladesh | Conference Proceedings | The International Conference on Engineering and Business Education, Innovation and Entrepreneurship | 2012 | Dr. Lal Mohan Baral | |
| Identification of the ways of evaluating comfort and physical properties of Textile Materials | Journal Article | Annals of University of Oradea, Fascicle of Textiles, Leatherwork | 2012 | Mr. Mohammad Faizur Rahman | |
| Identification of the Ways of Evaluating Comfort and Physical Properties of Textile Materials | Conference Proceedings | Annals of the University of Oradea | 2012 | Mr. Emdadul Haque | |
| Impact of Instructional Technology inclusions in course delivery for Engineering and Business Education | Conference Proceedings | The International Conference on Engineering and Business Education, Innovation and Entrepreneurship | 2012 | Dr. Lal Mohan Baral | |
| Influence on Dimensional Changes of Cotton Plain Single Jersey Weft Knitted Fabric at Different Relaxed States Due to the Variation of Knitting Parameters | Journal Article | The AUST Journal of Science and Technology | 2012 | Dr. A. K. M. Mobarok Hossain | Paper Link |
| Prediction of dimension and performance of finished cotton knitted fabric from knitting variables | Journal Article | Annals of the University of Oradea, Fascicle of Textiles, Leatherwork | 2012 | Dr. A. K. M. Mobarok Hossain | Paper Link |
| Process capability analysis: An effective tool for assessment of yarn manufacturing process. | Journal Article | Institutional Engineering and Technology (IET) | 2012 | Dr. Chowdhury Jony Moin | Paper Link |
| Quality assessment of large blotch printed polyester/cotton blend fabric with disperse/reactive dye over pigment dye. | Journal Article | Institutional Engineering and Technology (IET) | 2012 | Dr. Chowdhury Jony Moin | Paper Link |
| Research evaluation in engineering schools | Conference Proceedings | The International Conference on Engineering and Business Education, Innovation and Entrepreneurship | 2012 | Dr. Lal Mohan Baral | |
| Responsive Camouflage Textile | Conference Proceedings | Fibre Society Spring Conference | 2012 | Mr. Muksit Ahamed Chowdhury | |
| Visitation of Yarn Twist on Divers Properties of Cotton Knitted Single Jersey Fabric | Journal Article | International Journal of Current Engineering and Technology | 2012 | Ms. Nasrin Akter | |
| A statistical Approach: Elimination of stripping process from dyeing process. | Journal Article | Journal of Innovation & Development Strategy (JIDS) | 2011 | Dr. Chowdhury Jony Moin | Paper Link |
| A Study on the Effect of Stitch Length and Knit Structures on the Width and Area Weight of Weft Knitted Single Jersey Fabrics | Conference Proceedings | 2011 | Mr. Emdadul Haque | ||
| Application of textile technology for the prevention of UV-induced skin cancer | Conference Proceedings | Annals of the University of Oradea, Fascicle of Textiles, Leatherwork. | 2011 | Mr. Md. Ershad Khan | |
| Comparative analysis between conventional pre-treatment and biopreparation | Journal Article | International Journal of Engineering \& Technoloy | 2011 | Ms. Sonia Hossain | |
| Comparative analysis between conventional pre-treatment and biopreparation | Journal Article | International Journal of Engineering & Technology | 2011 | Mr. Md. Koushic Uddin | |
| Customization of STARFISH Technology in the production of Cotton-Knit Fabric: A Practical Approach | Journal Article | International Journal of Engineering & Technology | 2011 | Dr. A. K. M. Mobarok Hossain | Paper Link |
| Determining the most frequent defects for circular weft knitting fabric machines: A case study | Journal Article | Journal of Innovation and Development Strategy | 2011 | Dr. A. K. M. Mobarok Hossain | Paper Link |
| Determining the most frequent defects for circular weft knitting fabric machines: A case study. | Journal Article | Journal of Innovation & Development Strategy (JIDS) | 2011 | Dr. Chowdhury Jony Moin | Paper Link |
| Effect of flat speed of carding machine on quality of card sliver and yarn | Conference Proceedings | Annals of the University of Oradea, Fascicle of Textiles, Leatherwork | 2011 | Mr. Subrata Kumar Saha | Paper Link |
| Effect of flat speed of carding machine on quality of card sliver and yarn. | Conference Proceedings | International Scientific Conference “Innovative solutions for sustainable development of textiles industry” | 2011 | Dr. Chowdhury Jony Moin | |
| Effect of flat speed of carding machine on quality of carded sliver and yarn | Conference Proceedings | Annals of the University of Oradea, Fascicle of Textiles, Leatherwork, Romania. | 2011 | Mr. Jamal Hossen | |
| Effect of Stitch Length and yarn count on grey and finished widths of 1 X 1 flat knit Fabric | Conference Proceedings | Annals of the University of Oradea, Fascicle of Textiles, Leatherwork Romania. | 2011 | Mr. Jamal Hossen | |
| Effect of stitch length on drape co-efficient for rib fabric | Journal Article | International Journal of Engineering & Technology | 2011 | Mr. Md. Ershad Khan | Paper Link |
| EFFECT OF STITCH LENGTH ON DRAPE CO-EFFICIENT FOR RIB FABRIC | Journal Article | International Journal of Engineering & Technology | 2011 | Mr. Sheikh Nazmul Hoque | Paper Link |
| Effect of yarn count on pilling for plain single jersey weft knitted fabric. | Conference Proceedings | Annals of the University of Oradea, Fascicle of Textiles, Leatherwork. | 2011 | Mr. Md. Ershad Khan | |
| Effects of Combed and Carded Yarn on Weft Knitted Finished Fabric Quality | Journal Article | IJET-IJENS | 2011 | Ms. Nasrin Akter | |
| EFFECTS OF YARN TWIST ON THE SPIRALITY OF PLAIN KNITTED COTTON FABRICS | Journal Article | Journal of Innovation ,Development and Strategy | 2011 | Ms. Nasrin Akter | |
| Efficiency Analysis in Rapier Loom | Journal Article | International Journal of Basic & Applied Sciences IJBAS | 2011 | Mr. Md. Ruhul Amin | Paper Link |
| Feasibility Study of CAD and CAM Technology in Garments Industries of Bangladesh | Journal Article | Advanced Material Research | 2011 | Dr. Lal Mohan Baral | |
| Improving performance of the cutting section applying lean tool: A case study of a Bangladeshi Knitwear Company. | Conference Proceedings | International Scientific Conference “Innovative solutions for sustainable development of textiles industry" | 2011 | Dr. Chowdhury Jony Moin | |
| Improving performance of the cutting section applying tool: A case study of a Bangladeshi knitware company | Conference Proceedings | Annals of the University of Oradea, Fascicle of Textiles, Leatherwork | 2011 | Mr. Subrata Kumar Saha | |
| Influence of Fabric Tightness on Spirality of Weft-Knitted Plain Cotton Fabric | Journal Article | Annals of the University of Oradea, Fascicle of Textiles, Leatherwork, | 2011 | Dr. A. K. M. Mobarok Hossain | Paper Link |
| Optimization of doubling at draw frame for quality of card sliver and yarn | Journal Article | International Journal of Engineering & Technology | 2011 | Mr. Subrata Kumar Saha | |
| Optimization of doubling at draw frame for quality of carded ring yarn | Journal Article | International Journal of Engineering and Technology. IJET-IJENS | 2011 | Mr. Jamal Hossen | Paper Link |
| Recent Advances in Circular Weft Knitting Fabric Machines-A Review | Journal Article | Annals of the University of Oradea, Fascicle of Textiles, Leatherwork | 2011 | Dr. A. K. M. Mobarok Hossain | Paper Link |
| Selection of appropriate ring traveler number for different count of cotton hosiery yarn | Journal Article | International Journal of Engineering and Technology. IJET-IJENS. | 2011 | Mr. Jamal Hossen | Paper Link |
| Selection of Appropriate Ring Traveller Number for Different Count of Cotton Hosiery Yarn | Journal Article | International Journal of Engineering and Technology | 2011 | Mr. Subrata Kumar Saha | Paper Link |
| Study on range of fabric cost percentage against FOB price of knit garments | Conference Proceedings | The International Conference “Innovative solutions for sustainable development of textiles industries'' | 2011 | Dr. Lal Mohan Baral | |
| Technology of Denim Manufacturing | Book | 2011 | Mr. Md. Ershad Khan | ||
| Textile & Apparel Dictionary (English to Bengali & English) | Book | 2011 | Dr. Chowdhury Jony Moin | ||
| Textile and Apparel Dictionary | Book | 2011 | Mr. Md. Ershad Khan | ||
| A Comparative Study on Silk Dyeing with acid dye and reactive dye | Journal Article | International Journal of Engineering & Technology IJET-IJENS | 2010 | Ms. Sonia Hossain | Paper Link |
| A comparitive study on silk dyeing with acid dye and reactive dye | Journal Article | International Journal of Engineering & Technology | 2010 | Mr. Md. Koushic Uddin | |
| A study on ecofriendly garments – Bangladesh aspect | Conference Proceedings | 13th Annual paper meet of ME Division, IEB, Dhaka | 2010 | Mr. Mohammad Faizur Rahman | |
| Analysis of seam strength on different needle size | Journal Article | Annals of University of Oradea, Fascicle of Textiles, Leatherwork | 2010 | Mr. Mohammad Faizur Rahman | |
| Comparative Study of Complaint & Non-Compliant RMG Factories in Bangladesh | Journal Article | International Journal of Engineering & Technology (IJET) | 2010 | Dr. Lal Mohan Baral | |
| Defects and quality optimization of core-span yarn containing spandex | Conference Proceedings | Annals of the University of Oradea, Fascicle of Textiles, Leatherwork | 2010 | Mr. Subrata Kumar Saha | |
| Effect of Stitch Length on Pilling for Plain Single Jersey Weft Knitted Fabric | Conference Proceedings | 13th Annual paper meet of ME Division, IEB, Dhaka | 2010 | Mr. Mohammad Faizur Rahman | |
| Effect of Stitch Length on Pilling for Plain Single Jersey Weft Knitted Fabric | Conference Proceedings | 13th APM, Mechanical Engineering Division, IEB. | 2010 | Mr. Md. Ershad Khan | |
| Effect of Stitch Length on Pilling for Plain Single Jersey Weft Knitted Fabric | Conference Proceedings | 13th APM, Mechanical Engineering Division, IEB, Dhaka | 2010 | Mr. Sheikh Nazmul Hoque | |
| Effect of Weave Structure on Weaving Performance and Fabric Properties | Conference Proceedings | 13th Annual Paper Meet | 2010 | Mr. Md. Ruhul Amin | |
| Study on Computer integrated method in Bangladeshi Textile Industry. | Journal Article | Journal of Innovation & Development Strategy (JIDS) | 2010 | Dr. Chowdhury Jony Moin | Paper Link |
| Study on Consumption of Warp Yarn in Producing Woven Fabrics of Various Constructions | Conference Proceedings | 13th Annual paper meet of ME Division, IEB, Dhaka | 2010 | Mr. Mohammad Faizur Rahman | |
| Study on the effect of stitch length on bursting strength of knit fabric | Journal Article | Annals of University of Oradea, Fascicle of Textiles, Leatherwork | 2010 | Mr. Mohammad Faizur Rahman | |
| Study on Value Addition in Knit Garments of Bangladesh and Price Analysis between Basic Style & Value Added Style | Conference Proceedings | The 13th Annual paper meet of ME Division | 2010 | Dr. Lal Mohan Baral | |
| Study on waste reduction in different sections of garments manufacturing process | Journal Article | Annals of University of Oradea, Fascicle of Textiles, Leatherwork | 2010 | Mr. Mohammad Faizur Rahman | |
| “Quality Management in Garments Industry of Bangladesh” | Journal Article | The Journal of Management of Sustainable Development (MSD) | 2009 | Dr. Lal Mohan Baral | |
| A study on dry cleaning technology | Journal Article | Annals of University of Oradea, Fascicle of Textiles, Leatherwork | 2009 | Mr. Mohammad Faizur Rahman | |
| Determination of the Clothing Comfort of Spacer Fabrics by Chimney Effect Model | Conference Proceedings | The International Conference “Innovative solutions for sustainable development of textiles industries'' | 2009 | Dr. Lal Mohan Baral | |
| Existing supply chain frame work of garments industry of Bangladesh. | Journal Article | Southeast University Journal of Science & Engineering (SEUJSE) | 2009 | Dr. Chowdhury Jony Moin | |
| Process for level dyeing of 100% cotton knit fabrics with reactive dye. | Journal Article | Journal of Innovation & Development Strategy (JIDS) | 2009 | Dr. Chowdhury Jony Moin | Paper Link |
| Quality Management in Garments Industry of Bangladesh | Journal Article | Journal of Management of Sustainable Development (MSD) | 2009 | Mr. Mohammad Faizur Rahman | Paper Link |
| Benefits of ICT (Information and Communication Technology) in garments industry | Journal Article | ‘Bangladesh Textile Today | 2008 | Mr. Mohammad Faizur Rahman | |
| Analysis on the proper utilization of man and machine to improve the efficiency and a proper line balancing of a sewing line: A case study | Journal Article | International Journal of Scientific & Engineering Research | 0 | Ms. Sharmin Akter | Paper Link |
| Comparative Analysis of Laser Treatment on Solid and Yarn Dyed Cotton Fabric | Journal Article | 0 | Ms. Marzia Islam | ||
| Comparative Analysis of Seam Strength, Seam Slippage and Seam Efficiency of Lapped Seam and Edge Neatening Seam | Journal Article | 0 | Ms. Marzia Islam | ||
| Effects of Cationizer on Different Shade Percentage of Reactive Dye for Dyeing Cotton Knit Fabric | Journal Article | 0 | Ms. Marzia Islam | ||
| Impact of Fabric Density, Color and Composition of Plain weave Fabric on Ultraviolet Protective Factor | Journal Article | 0 | Ms. Marzia Islam | ||
| Optimization of Time and Temperature for Stone Washed Denim Fabric | Journal Article | 0 | Ms. Marzia Islam |
Faculty of Engineering
Ahsanullah University of Science and Technology
141 & 142, Love Road, Tejgaon Industrial Area, Dhaka-1208
Tel. (8802) 8870422, Ext. 107, 114, Fax : (8802) 8870418
Email: info@aust.edu, regr@aust.edu